Thalhammer Model B Tripod with Albert swivel head

-SOLD-

Legs total extension: (4ft-7") 55"; legs pull in to a height of 32". One leg base missing pad. One leg clamp knob not the original one; another leg's clamp knob wings broken off, but working. Cosmetic wear on the chrome and some faint rust spots. Wooden legs---no damage, no splinters, no breaks.

The Albert tripod head moves up/down 180 degrees, and 360 left to right; base is 2-1/2" x 3" long

$150.00

---

 

Heavy duty Thalhammer Compac-Tripod

Legs extension 3'8"; 1" width x 7/16" thick. Main leg when extension pulled in: 2'1"; 1-1/2" width x 1/2" thick. Overall open: appx 6'

Base tube: 1-1/2". Leg feet, thick rubber: 2-1/2" l x 1-1/2" width. Leg support to base 8-1/2" long.

Tripod head 1-13/16" dia., swivels/pans 360 degrees, marked on head base in 15 degree increment from 0-90, in increasing then decreasing order.

Manufactured by Davis & Sanford Co. Inc, Rochelle, NY. Pat. Pending. On head, mfg Thalhammer, Los Angeles, CA

$150.00

 

---

Wood tripod for telescope

 

Leg when closed: 2'4" tall x 1" wide x 1/2" thick.

With legs extended, total height: 4'3". Leg extension: 1" wide x 3/4" thick; the feet are a bit pointed, but not terribly so. One could install metal or rubber feet on them. Looks like tripod is made of cherry wood; pretty good condition; one leg has thin small fraying on one margin

Adapter fork mount on top is 4-1/4" wide x 5" l, and it can unscrew off.

$60.00

extended	with extension legs in
	closed for packing

 

---

 

SLIK SL-5 ball tripod head -SOLD-

2-1/16" BALL HEAD top base; 1-1/16" bottom base; ball 1-3/16" dia. Comes with detachable Slik Low Angle post (1-1/8")

$10.00

---

 

KODAK CLAMP-ON TRIPOD CLAMP -SOLD-

$45.00

Total length: 8". Clamp opening 2-1/4" w/ 5/16" dia. clamp screw. 2-1/2" width clamp body

1/4" screw at top adapter. Everything moves smooth, 90 degrees. The removable brown piece/adapter at the top, I have no clue what it's for. There are some stains/stuff on the screw-on chrome knobs; paint chipped off here and there. Surface rubbed-off rust in some spots. However, everything is fully functional.

---

 

SUNSET Tripod Head -SOLD-

Head moves left/right when handle is loosened. When bottom screw loosened, whole unit moves up/down. The handle is not for panning the head around.

Handle: 7-1/2" long. Base of tripod: 3-1/8" l x 2-5/16" w with a mount screw adapter. The adapters shown to the side are not necessarily the original, but they fit, so will include them, in case they are needed. They are both plastic pieces. The one on the left can screw into the tripod head. Note: in the pic, screw looks rusty, but that is just in the picture, the way the light hit it.

---

 

Various Tripod parts

$16.00

---

 

Heavy Duty U Clamp

5" distance at bottom, 3-1/2" U portion. 4" total length, 3-1/2" length U portion. 1-1/4" width

$20.00

---

Smith-Victor Model S5 studio light stand

8' 3-1/2" tall. Base rod 1'7" x 7/8" dia. 4 extensions: 1'6",1'7",1'9",1'9". Legs: 2' long x 11/16" thick

$40.00