GRISWOLD FILM SPLICER JR MODEL 8 & 16MM
Serial J 80035. Exclusive Distributor NEUMADE PRODUCTS CORP, NEW YORK, NY
MFD.BY GRISWOLD MACH. WKS. PT. JEFFERSON N.Y.
Dimension: appx 4"wide x 5"length; each base is 2-5/16" long x 7/8" wide
The very top arms move with a bit more difficulty, but not stuck at all. May be a bit mis-aligned; better to move the left hand up/down first. The ones underneath, above base plates and metal posts, move easily. Unit seems to have had a top paint at one time, most of it gone now.
$25.00
 |
|
 |
 |
 |
 |
Cine-printer Professional Model by Superior Bulk Film Co
L & F Photo Specialities Inc, Chicago
-SOLD-
Motor switch, works, wheel turns very well with no problems. Lamp switch; works; red light. 4 metal spool things, three of them are 16mm and one of them is 8mm.
Dimensions: 10" length x 10-1/2" high x 8 1/2" wide. Cosmetic wear. Some screw mising.
Info from the net:printer operates in a darkroom to duplicate Super 8 single-strand originals
$50.00
 |
 |
Craig Projecto-Editor 16mm KE-16
Made by the Kalart Co. 75 watts. Uses lamp 75 watt T-8 DC. Lamp needs to be replaced. Unit used to work. 2 inches of the original cord were left coming out the unit, to which a new modern heavier cord has been attached to. Few cosmetic marks. Opened the top; main mirror looks clean, no scratches, some dust; there are two other mirrors, same condition. Spools and buttons move easily, no rust.
$10.00
 |
 |
Craig Splicer
Manufactured by Craig Movie Supply Co., Los Angeles, PAT Nos 1.550.038-1.672.542
Everything moves easily. Faint small surface rust on the side plates in the middle. Paint chipped. Leafs chrome cosmetic wear.
Left side there is a leaf which has the moving piston, locks in or opens; underneath, a screwed in plate, which can also be moved up once removing screw.
Right side, both leaf and plate lock in or move up; when moved out the way the middle square box can be seen. There is also the leaf in the front (with the mfg name), and it moves up or down.
Wood board measures 10-1/4" x 4-1/2" x 3/4" thick
$15.00
 |
 |
 |
 |
Cine Pro Stripmeter
Uses 5x7 sheet; exposes negative; make 5 successive exposures. 6-1/2" x 5-1/2"; window slot: 3-1/2" l
$15.00
 |
Nortronics Splicer/Dispenser
1/4" Tape QM-302. Appx. 5" x 2". Inside: green strip: 2" l; green strip portion in between chrome blades: 3/4". Strip in great condition; also the foam at the top lip
$15.00
Radio SHACK Splicer / Dispenser
Made in Japan. 1/4" Appx. 5" x 2". Inside: green strip: 2" l; green strip portion in between chrome blades: 3/4". Strip has some slices on it; the foam at the top lip in great condition
$8.00
POKUMA Co MINORI 8mm 16mm Splicer
Made in Japan. 5" x 4". Left leaf: 2-7/8" l x 1-/8" w ; right leaf: 1-5/8" w; left square: 1-7/8"
$25.00
