Film cameras accessories
Kalart Focuspot
-SOLD-
Made in the USA by Kalart. Pats #233763,2388714,2397160
The Kalart Focuspot is an illuminated focusing aid which helps in focusing in poor lighting conditions or total darkness
An advertisement from Kalart explains the features of the focuspot
Information from the net concerning the Kalart focuspot on a Kalart Rangefinder camera
Clean;nice. Bulb inside, filament ok. Mirror inside no scratches that I could see; missing 1 screw holding the plate, and 1 screw holding the bulb holder.
For use with medium/large format film cameras: Graflex Crown Graphic, Speed Graphic, and others.
$55.00
 |
 |
Medium format camera wood rail/or back
Dimensions: 25.8cm high x 17cm wide x 2cm depth. Side of board has a slide channel 2mm wide. The rails on each side of the front is 5mm wide. The 'windows' measure 7.5cm high x 11.1 cm wide x 2cm depth. Distance of bottom window to middle knob is 8.5cm
Only part number I can see is F170 and painted letters UB
$50.00
--SOLD-
 |
 |
 |
 |
Beattie Coleman Transet 70mm Roll Film Medium Format Back
-SOLD-
Magazine type 34100.
Lever moves easily; exposure window goes up to 52, some dirt over some of the numbers; dirt spots inside, but no rust. Magazine/rollers look in good condition and functional. The red metal slider in the back pulls in/out not so easily. Magazine drops in, but not all the way down; I don't know if that is by design or not.
$40.00
 |
 |
 |
 |
Graflex Grafmatic 4x5 Film Holder 45" cat no 1268
-SOLD-
Nice condition. Clean. Holds and has 6 good condition septums. Pat. Pending. Minor cosmetic marks on outside of body and someone's name inscribed on it. Overall dimensions: 7-1/2" l x 4-11/16" w x 13/16" high
$90.00
 |
 |
GRAFLEX GRAFMATIC 4x5 GRAPHIC 45"
-SOLD-
Same as above, except does not have cat.no 1268 on it. Also has a half rotating wheel on the right side which closes the magazine down even when setting is on X
$100.00
 |
 |
Graflex GRAPHIC 4x5 Film Pack Adapter
Cosmetic marks, paint off in place, but in good condition inside. Opens easily. Single septum magazine type. From what I've seen online, this is catalog no. 1234 (but it's not written on the unit)
$35.00
 |
 |
Rolleiflex-B film plate holders
-SOLD-
Rolleiflex Sheet film accessory. Designed for single 2-1/4 x2-1/4 inch exposures on 2-1/2 x 3-1/2 inch plates of sheet film
No 1 and No 2 in good condition. No 3, the sponge at the edge needs replaced. Normal to little signs of usage; no bends, no dents, fully operational. Looks like stainless steel.
$75.00
 |
 |
Mamiyaflex-C film plate holders
Single film sheet holder 2-1/2" x 3-1/2". Numbered 1 E and 3 E. Both in great condition. No bends, no dents. Fully operational. Included extra septum
$80.00
--SOLD--
 |
 |
Mamiya C single exposure back attachment with plate holder
-SOLD-
For Mamiya C Professional. (C3, C330?). Great condition all items. All functional. Back attachment in the back, bottom rim, sponge needs to be replaced.
$125.00
 |
 |
 |
Mamiyaflex-C single exposure back attachment with plate holder
Great condition all items. All functional.
$125.00
 |
 |
 |
Graflex Graphic Camera Focusing Hood ?
Excellent condition, like new.
Overall dimensions:
Top: 3-5/8"L (92mm) x 3-3/8" W (85mm). Opening hole: 2-1/8" dia.
Bottom: 5-5/8" L (145mm) x 4-5/8" W (117mm). Opening square: 3-15/16" L (100mm) x 3-1/4" W (82mm). Rim around bottom opening: left/right 7/8" (22mm), top/bottom 11/16" (17mm)
Height: 4-1/4" (110mm)
Snaps present on both sides and pin at the bottom.
$40.00
 |
 |
Rollei F&H back attachment
-SOLD-
Made in Germany. Measures: 1-1/4" tall x 3" wide. Sponge in the back in good condition. Whole item in really good condition.
$40.00
 |
 |
 |
|
