Kodak Projection Print Scale with Solar charts
-SOLD-
$20.00
Made in Rochester N.Y, USA, by Eastman Kodak Company. Code no 357 printed inside box. Not completely flat.
Instructions included: The Kodak Projection Print Scale affords a quick and simple method of determining the correct exposure for any enlargement. On the inside pages a typical test print made with the Kodak Projection Print Scale is reproduced, with an explanation of the procedure to be followed.Included as well: Solar Critical Focusing Charts
Made by Burke & James, 233 W Madison St,Chicago IllinoisNote: wanted to wipe my fingerprint off the back with a damp cloth, and it produced a dark smudge on the backside, bottom right corner. Held to the light, the spot is not seen in the front.
Included: miniature strip of Solar Critical Focusing Chart, Made in Austria
Kodak Projection Print Scale
$10.00
-SOLD-
Nice condition; flat. Only difference from above, bottom print says "Patent Pending"
 |
VOSS Focus Scope Enlarging Aid
-SOLD-
Part 542-901. "W" wave symbol. Mirror inside.
2 ea. One of the scopes has a ding upper right by the rim of the bottom lens. Lens and mirror clean, no scratches that I could see.
$15.00 / $25.00
 |
|
 |
$7.00 |
Focus scope enlarging aid
-SOLD-
Made in japan. Hexagon symbol. Nice condition, clean lens/mirror
$20.00
 |
 |
Micromega Critical Focuser, grain photo focuser
-SOLD-
Label: Made in Japan for Omega Division
Label front: PROF.Z.KOANA SYSTEM
This is a high end heavy duty enlarging focuser that is known for its accuracy and reliability. Body heavy duty, metal I believe; not plastic
Condition:
Inside mirror: cleaning marks/scratches & 2 little blue dots at top and margin
Bottom mirror :cleaning marks
Lens: bright & clear, no scratches; tilting head 360degree
When I looked through the lens, and focused on the mirror, I don't see the scratches. But if you need to, try here for a replacement mirror orderdesk@fsmirrors.com.
The cost is appx $16-$20.00 for a 3.5" x 1.125" x 6mm STANDARD first surface mirrors
$70.00
 |
|
 |
|
 |
|
 |
|
 |
Rondo Enlarging Stripe-tester
-SOLD-
$15.00
Tester is used to make correct toned enlarging prints in one exposure, by giving the best indication of exposure time for enlarging jobs. Included: instructions. Glass board measures appx 4" x 3". Nice condition
Made by Rondo Company LTD. Tokyo, Japan
 |
ROWI photo safe print cutter
2" (5cm) scale. Blade part, sharp: 18cm (7") long; base 6cm at narrowest and 9cm at widest.(2-1/2" x 3-1/2"). Made in West Germany
$8.00
-SOLD-
Airequipt-4 WAY Easel
Airequipt Mfg Co Inc, New Rochester NY. Made in Japan
back-9-1/2 x 7-1/2; front:3 x 2; 4-1/2 x 3-1/2; 6-1/2 x 4. Cosmetic marks.
$15.00 ea (3 available)
1. left tab opens if wiggling; right tab, small underneath, one of them missing, but still functional
2. metal padding stain; fully functional. all tabs work ok 3. some cosmetic wear. all tabs work oki
Kodak 8 x 10 metal paper board
Made by Eastman Kodak. Very small cosmetic wear. Slide rulers move, marked 2-9 across, and 2-7 down
$20.00
Paterson Micro Focus Finder
-SOLD-
Made in England by Paterson Products LTD. Product no. 643. 6" tall
Provides accurate focusing on the actual image grain of the negative under high magnification.
$20.00
Unicolor 6"x6" Color Printing Filter Set
-SOLD-
CAT 358, CMY filter set: Cyan 77.5, Magenta 227.5, Yellow 227.5 UV included 22 filters. Quick find folder. Filter trim template.
$40.00
Thomas Studios 35mm Texture Screens
-SOLD-
Normally, the screens are placed in the enlarger with the subject print, to provide different textures. They can also be printed separately. Provided here: Medium Grain, Mesh, and Reticulated. Envelopes are somewhat worn, but the screens are in great condition.
$8.00
Kodak 4x5 Dry Mounting Tissue
Appx. 150 sheets. As pictured, some of the tissue is curled at the edges/corners.
$8.00
-SOLD-
Kodak 8x10 Dry Mounting Tissue
Cat 6432 1. Appx. 144 sheets. Some could have been used, but box looks pretty full. Seems to me in good condition.
$10.00
-SOLD-
Kodak Polycontrast 5" acetate filter
Numbers PC1(yellow), PC2 (cyan), PC4(dark purple). Great condition.
$27.00 all
Photographic Blotter Book
8-1/2" x 11", good condition inside no ripped bent pages, two wax paper sheets have folds in them.
Kalt lintless blotter book for drying BW/color prints and resin coated papers. Book has water spill marks, bends.
$15.00 both
Kodak Ektacolor FilterFinder Kit
-SOLD-
Cat 102 7408. Was in plastic wrapper, new, opened to take pictures.
Helps you pinpoint proper filtration and exposure for the entire roll being printed. Includes FilterFinder, a specially made piece of film which helps you determine proper filtration and exposure when making color prints from color negatives. The Locator strip, for evaluating test prints. Calculator dial. Gray card. Manual.
$35.00
Beseler Color Printing Filter Set
# 8932, 8933. Inlcudes 24 polyester color printing filters, to include a UV filter. #8932 5-1/2" x 5-1/2" for Beseler 23C and other enlargers. #8933 6" x 6" for Beseler 45M and other 4x5" enlargers
$25.00
-SOLD-
Kodak Q-14 color separation guides and gray scale
-SOLD-
Includes: Kodak color control patches, Kodak gray scale, and Kodak register marks. 14" l x 3" w
$29.00
ITD/CPM SPOTDODGER with Diffusion Discs
-SOLD-
Lightens shadows, extends highlights, blends and diffuses distraction, softens portraits, hides imperfections, produces numerous special effects.
$15.00
Ilford Cibachrome Color Printing Filter Set
-SOLD-
Includes nineteen 6x6 in color printing filters (each filter will make 3x3" filters)
In each filter slot, there is mostly 3 filters ea. Some only have 1 large filter, others 2 small filters and a med filter, other 3/4 small filters. I do not know if that's by design, or by missing.
$30.00
I.S.E. ONE-TOUCH FREE SIZE EASEL BOARD
Manufactured by I.S.E. MFG. CO. LTD. Made in Japan. 11x14 x 3/4" high, all heavy-duty metal. Has magnetic slider/holder bar.
Vertical lines run at: 2-1/2", 3-1/4", 4", 4-3/4", 5", 7", 8"
Horizontal line is at 7"
Board has a few very fine minor scratches on it, with a longer scratch on the right side where there are no lines/ruler.
Back: the bottom rim rubber strip most of it missing.
$15.00
BOGEN 7x9 Metal Easel Board with Blade Guides
Made by Bogen W.D.L. Corp, Yonkers NY. Made in Japan.
Complete metal construction. Nice condition, everything moves easily. Chipped paint on the hinges; very small cosmetic marks on the base board.
Left ruler is from 1"-5" and 2cm-13cm. Right Ruler is 1"-7" and 3cm-18cm
Exact dimensions of board: 7-1/8" x 9-1/2"
$30.00
8x10 Proof-Printer
Sponge still there, but seems flaky; bottom corners loose.
Metal base 1/2" thick. Glass 3/16" thick, no chips or scratches. Made in Taiwan.
$15.00
Technal 9x10 proof printer
Overall dimensions: 11-7/8" x 9", brushed metal. Sponge part: 9-3/8" x 9". Glass 1/8" thick. Base inclined: 3/8" high to 1/4" high.
Glass not chipped or scratched. Sponge used up, needs to be replaced.
$20.00
8x10 Glass (mirror)
-SOLD-
6mm thick; looks like glass, but when held up, it mirrors what's it being held against.
$15.00
